WHY THIS IS A BETTER SOLUTION

Many storm drain gates rely on a locking mechanism that hopefully unlocks when the water level reaches a set height. Many times, these gates don’t open and the streets flood, other times something gets stuck under the gate or the mechanism fails and the entire gate stays open defeating its purpose.

Each blade works independently. As the water flow increases each blade reacts separately, even if something sticks under some of the blades, the other blades close.

The blades have no height or width restrictions so they can fit into any size vault opening. Existing gates are side mounted and require minimum heights.

Many systems are non adjustable or set based on the water height on the curb. Current “adjustable” systems rely on a curb height calculation which can be inaccurate and lead to flooding.

The blade deflection is adjusted based on location and compliance requirements using the “Never Jam” tensioner. Simply rotating the hidden adjustment wheel increases or decreases the pressure required to open the blades. The amount the system opens can also be adjusted. This is especially critical for hillside locations or high debris areas.

The individual blades help move trash away from the storm drain opening. Trash contacts the smooth blades and keeps moving away from the storm drain opening.

The only portion of the Bio Clean ARS system that opens is the area receiving the most volume of water. If portions of the system are not receiving large volumes of water, then they remain closed. This greatly reduces the amount of debris entering the storm drain during a weather event. Existing systems are either completely open or completely closed.

The Bio Clean ARS Storm Drain System is made of a durable polymer which is fully recyclable. Since the polymer has no scrap value compared to stainless steel systems, theft is virtually eliminated.

Having independent “blades” as opposed to one perforated steel panel means less damage from impacts as blades can move independently.